With regards to blade diameter and cutting angle, the Hitachi C10FSHC is one the best, and most versatile miter saws in the industry. The 10-inch saw blade diameter makes it ideal for professionals as well as DIY enthusiasts, especially for use on smaller projects.
Though affordable, this Hitachi compound miter saw features quality construction and reliable performance. According to the manufacturer, this tool is designed to deliver the perfect blend of power and control. Again, it is packed with a range of advanced features similar to those on high-end matter saws.
For enhanced precision, the manufacturer applies the renowned laser guide technology in this saw. Throughout this Hitachi C10FSHC miter saw review, you will learn exactly what makes the model a must-buy woodworking tool.
Hitachi C10FSHC Compound Miter Saw Specs
- Amperage: 15 amps
- Blade Diameter: 10 inches
- Miter Angle Range: 0-55 degree L and 0-60 degree R
- Slide Type: Fixed Rail
- No-Load Max Speed: 3,200 RPM
- Bevel Angle Range: 0-48 degree L/R
- Max Cut Miter Left/Right @ 45 Degrees: 8″ x 3-1/2″, 8-3/4″ x 2-1/2″
- Laser Marker: Available
- Max Cut Bevel Right @ 45 Degree: 11-1/2″ x 1″, 12-1/2″ x 3/4″
- Saw Blade Drive Mechanism: Gears
- Max Cut @ 0 Degrees: 11-1/2″ x 3-1/2″ 12-1/2″ x 2-1/2″
- Front Bevel Lock Lever: Available
- Weight: 45.6 pounds
- Bevel Cutting Range: L/R 48 degrees
- Miter Cutting Range: L 55 degrees R 60 degrees
Comparing Other Hitachi Miter Saws
Hitachi C10FSHC Miter Saw Top Benefits
Comparatively affordable- Features a simple, and compact slide system
- Enhanced flexibility; 0-60 degrees miter angle to the right and 0-55 degree to the left
- Powered by a reliable 15-amp motor, delivering up to 3,800 RPM in speed
- Features a laser marker system
- Can bevel up to 48 degrees to the left or right
- Miter and Bevel scales have positive stops and indications
- Relatively lightweight and easy to control
Comparatively affordablePossible Drawbacks
The trigger mechanism and control on this saw does not have a thumb safety feature.
Hitachi C10FSHC Compound Miter Saw Features and Capabilities
Just as is the case with other power tools by Hitachi, the C10FSHC embodies state-of-the-art features and superior construction. With this power tool, the manufacturer guaranteed exceptional quality and performance. Basically, the tool has a soft start and only produces minimal recoil and noise.
The popularity enjoyed by this saw may be attributed to a range of intuitive controls and performance features. For instance, it features a splinter guard behind its fence. This feature will ensure that all the cuts are accurate and produce smooth edges.
Other capabilities you will come to like about this Hitachi miter saw include:
Powerful Motor
The Hitachi C10FSHC compound miter saw is powered by a 15-am motor. The motor is designed to offer a soft start and drive the blade directly for optimal power transfer.
The motor features externally accessible carbon brushes, making it easy for you to replace brushes when the time comes. The system runs smoothly to deliver a no-load speed of up to 3,800 revolutions per minute (RPM).
However, it is equipped with about ten positive stops on its speed adjustment settings. This allows you to adjust the tool to your preferred speed with ease.
This motor is fired with electric brake to bring the blinds to a standstill within a couple of seconds. The motor is connected to a 10-inch carbide blade and a stainless steel detent plate.
A Compact Sliding System
Like some of the best miter saw in the industry, this Hitachi miter saw is equipped with a set of fixed rails. The system is designed in such a way that the sliding arm moves along these risks aided by linear motion bearings. This makes it fast and effortless for you to slide the saw when the need arises.
The result is a saw that can be pushed up against a wall and takes up very little real estate. This will, in turn, save you a considerable amount of space in your workshop or garage.
Laser Guide and LED Lighting
The integrated laser marker feature of the saw accurately indicates where the blade will cut on the material. To allow for enhanced versatility, this laser guide may be adjusted to the right or left of the cut, depending on your preference. This should be done using the dials located on the saw blade cover.
These adjustment dials are conveniently positioned on to of the saw handle, making it easy for you to reach them without having to release the handle. They are then covered using a rubber, weather-proof boot. If you are working in a dark environment, you can turn the inbuilt LED light on to illuminate your working area.
Reliable Performance and Precision
Powered by a 15-amp direct drive motor, this saw achieved a remarkable level of efficiency. This power train powers the tool to smoothly cut through hardwoods, saving time and reducing blade wear. It features soft start to minimize noise and recoil at startup.
The electric brake, on the other hand, halts blade rotation within seconds to prevent unintended cuts. The dual aluminum fence on the saw stands tall allowing crown molding to be cut vertically for convenience. The sliding fences are also removable, which eliminates the chances of accidental contact when making extreme bevel and miter cuts.
Comfort and Ergonomics
The horizontal grip of the tool is covered by an elastomer grip. This grip has been proven to reduce vibrations, preventing slippage and improving its comfort. The externally accessible carbon brush makes for quick and easy changes. The tool comes with a dust bag that attaches to its rear, effectively reducing debris in the working area.
This dust port may also be connected to a shop VAC for improved convenience. The tool comes complete with a 10” 40-tooth TCT Saw blade, dust bag, and a 13mm box wrench.
Miter and Bevel Cutting Capacity
Versatility is another thing you will come to like about this saw, capable of making bevel and mite cuts. With regards to miter cuts, the tool has an angle range of 0-55 degrees to the left and 0-60 degrees to the right. Miter angles may be quickly adjusted using the onboard thumb actuated positive stops.
The tool also features a positive stop override system, allowing you to selectively pass by all miter detent stops and dial into precise angles faster. The tool may also be used to make bevel cuts at an angle o 0 to 48 degrees to the left or right.
It is designed to quickly flip the saw blade and leave the work material in place for a broader range of cuts. As a matter of fact, the C10FSHC is the very first Hitachi power saw to be fitted with a convenient up-front bevel lock.
Why Buy the Hitachi C10FSHC Miter Saw?
Basically, the C10FSHC is an ideal 10” sliding dual compound miter saw for use at the job site or in a tight shop that only has limited benchtop space. It is specifically designed to appeal to the needs of trim carpenters, framers, and woodworkers.
In the Hitachi C10FSH, you have an affordable, versatile, and highly customizable bevel and miter power saw.
Leave a Reply